Examples
Home
What's New
How Does It Work
Products
Store Locator
Examples
Tips/Techniques
Contact Us
Examples > Word Stamps

Instructions for Using Reverze-it™ Word Stamps

Reverze-it word stamps have a conventional word image on side "A" and the same word reversed on side "B".

Directions

  1. Ink and transfer side B to an Artlenz AZ stamp (*).

  2. Stamp the AZ stamp direct to paper.

  3. Ink and stamp side 'A' direct to paper, align and apply the lens. The image stamped with side 'A' will be prominent and will 'stay' as the card is flexed. The image transferred from side 'B' appears as a shadow image and (with good lens alignment) will come and go as the card is flexed. If the alignment is slightly off the 'B' image will 'shimmer' (come and go in sections).
* If you want other images to come-and-go, stamp these images on the AZ along with
    the word stamp so that all images are transferred from the AZ to paper at one time.

Tips

  • Do not over ink side 'B' (the reverse side). This will flood the tiny print lines on the AZ stamp and prevent a good flip image. (If you have a heavy inking on the word stamp 'stamp off' before stamping on the AZ.)
  • Lens Alignment is critical for a good flip.
  • Make sure that you can print a good flip image with your AZ stamp (see the Trade-in Program under Products).

Reverze-it example Instructions for the "Thank You" card:

Stamps:
AZ – Artlenz AZ 4050 or AZ 3030
Thank You – Artlenz Reverze-it
Leaf – Stamp Oasis
Bow – Printworks
Acorn – unknown
Ink:
Kaleidacolor Autumn Leaves
  1. Stamp the leaf in a circular or wreath pattern on the AZ stamp.

  2. Ink and stamp the reverse 'Thank You' (side 'B') at the top of the AZ stamp and stamp the AZ on glossy paper.

  3. Stamp the leaf, bow, acorn and "Thank You" (side 'A') direct to paper.

  4. Align and apply the lens.

  5. Trim and edge with a gold Krylon or Pilot pen.

  6. Mat with complementary colored card stock.

    Back to the top